Cattie Adhesives – PUR Reactive Hot Melt
POLYURETHANE HOT MELT ADHESIVES
Automotive Interior and Component Assembly | General Assembly Filter Assembly | Flooring | Rigid Panel Bonding Textile Bonding | Window and Door Assembly | Wood Bonding
What is PUR Hot Melt Adhesive ?
PUR Hot Melt Adhesive (Polyurethane) is a reactive moisture curing adhesive known for – Strong Bonds and Exceptional Heat, Cold and Moisture-Resistance; this makes them an excellent choice for most difficult to bond, low energy substrates and they perform very well in extreme weather environments.
Our PUR Reactive Hot Melt Adhesives can be Custom Formulated to have a Very High Initial Tack and Green Strength.
After PUR Hot Melt adhesive has been applied to a substrate it will start to cross-link and form a final bond.
Depending on air humidity % and substrate moisture conditions; PUR Hot Melt develops 50-80 % of its final bond strength within 3 – 6 hours. The full reactive cure time is normally 24 to 36 hours after application.
PUR Hot has a Wide Temperature performance range – From: -40°F to + 300°F.
Cattie Adhesives manufactures a full line of PUR Reactive Hot Melt Adhesives for Industrial applications. We have the knowledge and experience to help you design and scale-up your PUR hot melt adhesive production and help to improve your production speed, accuracy, efficiency and consistency.
Our PUR Hot Melt Adhesives are designed to form very strong permanent bonds to most materials including:
- Solid Woods, Veneer
- MDF/Particle Board
- Metals
- Papers
- Glass
- Fiber Glass, Foams
- Plastics, Rubber
- PVC, Foils
Our PUR Hot Melt Adhesives can be Custom Formulated for Strong, Fast setting-Permanent bonding applications; or Slower setting applications. We have the ability to produce pigmented reactive hot melt adhesives, pre-polymers, and other custom products.
Our PUR Hot Melt Adhesives can be used with most Hot Melt Applicator Systems and are made to bond to most difficult substrates including – fiberglass, nylon, plastics, rubber, foam and coated papers.
PUR Hot Melt adhesives are applied molten like a conventional hot melt, but then cure by reaction with atmospheric moisture to form a cross-linked thermoset system.
PUR Hot Melts are fast drying and most bonded parts have the Green Strength to be handled after a few minutes.
PUR Hot Melt adhesives are widely used for the bonding of Large Panels, such as SIP Panels, Door manufacturing, Garage door Construction and the walls of Recreational vehicles.
PUR Hot Melt is commonly used for Laminating Foil to sheet metal for the production of Cans and Bottle Caps.
