Author: admin

Cattie Adhesives – Heat Seal Adhesives

---

What are Heat Seal Adhesives?

Heat Seal Adhesives & Coatings or Heat Seal Films are Hot Melts or Liquids that are applied to  paper, film, non-woven or foil substrates and Dried.  The final bond is not formed until the  Heat Seal Adhesive is later – Re-activated.

---

Cattie Adhesives manufactures a Full Line of  Hot Melt Heat Seals,  Heat Seal Films & Tapes,  Water based Heat Seal & Solvent based Heat Seal Coatings for many industrial – Food Packaging,  Flexible Packaging,  Paper Converting  and  Specialty Applications.

---

Our Heat Seal Adhesives & Coatings can be applied by different methods including –  Knife over roll, reverse roll, nip roller, gravure, brush, spray or roller. 

The Heat Sealing process can be performed Both In-line or after initial application.

---

Our Heat Seals can also be Custom formulated for specialty applications to meet requirements for –  viscosity, solids %, non-blocking, clarity & heat sealing temperature.

---

We also have the capability to  Coat our Heat Seals  onto many different substrates including  – felts, films, liners, magnet, papers, plastics, and textiles; for various medical and industrial applications.

---

We can supply our Heat Seal adhesive products in  – Tape and Roll Stock Form.  Click here for more information.

---

Below are some of our most common types of Heat Seal Adhesives:

---

# 7-8258

7-8258 Acrylic Emulsion heat seal adhesive –  58% Solids,  100cps.  A packaging adhesive polymer that is heat reactive, self-curing acrylic latex with carboxyl functionality.  Strong adhesion to polar substances with excellent water resistance; fast drying and high bond strength for wet laminations; high oil and plasticiser resistance after crosslinking; broad FDA approvals.

General Information:  7-8258 is excellent for wet laminating because it dries rapidly and develops high bond strength quickly. It performs well in high speed laminating operations.  # 7-8258 also forms strong bonds at relatively low heat sealing temperatures – critical for many temperature-sensitive substrates.  It has good specific adhesion to most polar substrates, and it forms tough, permanent bonds. It also has good water resistance.

---

# HS410

HS410 is an EVA type heat seal film adhesive – Self-wound on a 42# silicon liner that is transferable from the silicon liner.  HS410 has a wide range activation temperature with good adhesion to a variety of substrates including metals, coated films, papers and plastics. It was designed for bonding to difficult substrates in the sanding disc and Tin Tie adhesive markets.

---

HS410 – HEAT SEAL FILM ADHESIVE:

Adhesive Coat Weight lbs.:  14 ± 2.
Adhesive Softening Point °F:  175 ± 5.
Activation Temperature °F:  250 – 265.
Application Temperature °F:  300 – 350.
Dwell Time Sec:  0.2 plus (Depending on temperature and pressure).

General Information:  HS410 Adhesive is specifically formulated for bonding to metal, non-woven, paper and film substrates. All ingredients used in the makeup of this adhesive meet the requirements for FDA Regulation 175.105 “Adhesives”.

---

---

Solvent-based – Heat Seal Adhesives

We offer a full line of heat seals, glossy & matte overprints and primers for most requirements.

Some examples of our solvent based Overprints, Primers and Heat Seal products include:

---

# 8605 –  High heat resistant, very flexible mar & scuff resistant matte overprint having excellent hot release properties. Suitable for most films, aluminum foils, coated & non-coated papers.

# 8610 –  Super high heat resistant, glossy 2-part overprint for high demand applications. Used with most coated and non-coated papers and aluminum foils.

# 8611 – Primer used for a wide range of release applications, slip and primer coating for untreated film, paper & primed aluminum foil.

# 8485 – Heatseal coating used for a variety of films, foils & papers substrates. Can be custom formulated for various degrees of tear/bond strength and activation temperature depending on the substrate and final use requirements.

---

Some examples of our Heat Seal Adhesive applications are:

---

• • Credit card lamination.
  • Decorative laminates.
  • Film to fiberglass.
  • Film to foams.
  • Film to Foil /metalized film.
  • Heat seal lacquered aluminum foil.
  • Food grade heat seal lacquer foil.
  • Pharmaceutical blister pack foil.
  • Lacquered Aluminum Foil roll for processed cheese wrap.
  • Fire retardant heat seals.
  • Food packaging.
  • PVC to film.
  • Specialty heat seal applications.
  • Textiles for heat sealing.
  • Transfer decal film lamination.

Our Heat Seal Coatings are widely used for these applications:

---

• • Food Packaging
  • Paper Converting
  • Pharmaceutical Packaging
  • Flexible Packaging
  • Laminating
  • Yogurt Lidding
  • Blister Packaging
  • Credit Card Lamination

---

Water-based Heat Seal Adhesives

---

Some examples of our Water-based Heat Seal products include:

Product #	Description	MSDS/TDS
8215	Heat Seal Coating, Designed for Low Heat Resealing applications, Good Oil Resistance, PET/Foils, Strong Final Bonds to Papers, films, foils.	Request >>
8240	Heat Seal Coating, Designed for food packaging applications, Good Oil Resistance, Strong Final Bonds to Papers, films, foils, Non-Blocking.	Request >>
8300	Heat Seal Coating, Designed for Yogurt Lidding applications, Good Oil Resistance, Easy Clean up, Strong Final Bonds to Papers, films, foils, Non-Blocking.	Request >>
8347	Heat Seal Coating, Easy Clean up, Strong Final Bonds to Papers, films, foils, Non-Blocking, Flexible, 1,500 CPS.	Request >>
8362	Heat Seal Coating, Strongest Final Bonds to Polyester Films, Non-Blocking, Flexible, Designed for Extrusion Laminating applications. 80,000 CPS, Can be made at any Viscosity.	Request >>

Read More