Heat Seal Adhesives and Heat Seal Coating for Paper and Plastic films.

Cattie Adhesives manufactures a Full Line of Heat Seal Adhesives and Heat Seal Coating for Paper and Plastic films including Cups – Labels – Lidding – Plastic films. Read More

Hot Melt Adhesive

What is Hot Melt Adhesive?

Hot Melt Adhesive is a Solvent-free adhesive made from 100% non-volatile thermoplastic materials, hot melt adhesives are solid at room temperature, melted to application temperature and applied in a molten state.

Hot Melt Adhesive is applied as a Hot Bead, Dot or Molten Film and forms into a solid material when the hot melt cools down below its softening point.


All our hot melt adhesives are formulated to provide desired adhesion, fast set speed, open time/bonding range, and heat and/or cold resistance properties.

Hot melt adhesives are available in pellets, micro-chips, chips, pillows, and stick form.


 

Some Key benefits of using Hot Melt Adhesive:

    • Hot melt Adhesive is 100% solid and environmentally friendly.

    • Hot melts have Fast Set Speed to allow for higher speed production lines.

    • Hot melt adhesives are Water resistant and provide excellent Glue Line Control.

    • Hot melts have a Long shelf life and do not require any special storage conditions.

    • Hot melts stick to almost any substrate and provide great final bonds.

    • Hot melts can be formulated to have long open time and can be used for – High Heat bonding and Deep Freeze gluing applications.



Cattie Adhesives manufactures Bulk Hot Melt Adhesive
 for Industrial applications including:

– Door Panel Assembly
– Sound Deadener Installation
– Headliner Assembly
– Impact Block Bonding
– Carpet Attachment
– Seat Building & Assembly

– Cabinet Assembly
– Drawer Bottom Bonding
– Vanity Back Assembly
– Mirror Assembly
– Profile Wrapping
– Office Panel Assembly

–Window Sealing
– Pallet Fabrication
– Pre-Fab Wall Construction

– Trim Installation
– Insulation Bonding
– Gasketing

– P.O.P. Display Assembly
– Foam Insert Bonding

– Case Closing
– Tray Forming
– Carton Sealing
– Bag Sealing
– Over Wrapping
– Pallet Load Stabilization
– Dunnage Assembly

– Case Binding
– Joint Making
– Side Glue
– Insert Bonding

– Sand Core Bonding

– Standing Seam Assembly
– Panel Bonding
– Seam Sealing

– Insulation Bonding
– Duct Sealing

– Potting & Encapsulating
– Wire Tacking
– Small Component Assembly

– End Cap Bonding
– Pleat Separation
– Seam & Pleat Sealing

– Pillow-Top Assembly
– Non-Woven Attachments

– Laminating
– Plastic Corrugations
– General Assembly

– Labels
– Business Forms
– Multi-Wall Bag Construction
– Flexible Ducting
– Casket Assembly
– Luggage Assembly
– Paint Roller Fabrication
– Scrub Sponge Bonding
– Football Helmet Assembly
– Flower Arrangement Bonding
– Ornament Assembly
– Toy Fabrication
– Lamp Shade Bonding
– Basket Assembly
– Cap Lining

 


Our Hot Melts can be Custom Formulated to be:

  • Permanent

  • Removable

  • Pressure Sensitive

  • Remoisten able

  • Reposition able

  • Clear 

  • Non-Staining

  • Fast or Slow Setting

  • Weather Stabilized

  • UV light detectable

  • Fire Retardant


We offer  Specialty Grade Hot melts including:

    • UL Approved Hot Melts: UL # MH28876. UL approved adhesives for Insulation and HVAC applications. # 9761.

    • Automotive Grade Assembly Hot Melts formulated to meet requirements of General Motors GM Specification 998 5676.  # 9195.

    • Heat Seal Lidding Hot Melts – Extrusion/Co-Extrusion/Gravure/Slot Die- FDA Direct – HIPS, PET, PVC, PETG, OPET, CPET, Foils.  # 8159.

    • Cap Liner Hot Melts – for Induction Seal and Torque Seal Cap Liners.

    • Hot Melts with UV / Black Light Indictor added.  # 8403UV.

    • Polyester Hot Melt Adhesives for Dry Cleaning and Chemical Resistance.  # 8599.

    • Pressure Sensitive Adhesive Sheets for packaging, promotional media, POP displays, shipping labels.

(more…)

Heat Seal Adhesives

Cattie Adhesives – Heat Seal Adhesives


What are Heat Seal Adhesives?

Heat Seal Adhesives & Coatings or Heat Seal Films are Hot Melts or Liquids that are applied to  paper, film, non-woven or foil substrates and Dried.  The final bond is not formed until the  Heat Seal Adhesive is later – Re-activated.


Cattie Adhesives manufactures a Full Line of  Hot Melt Heat Seals,  Heat Seal Films & Tapes,  Water based Heat Seal & Solvent based Heat Seal Coatings for many industrial – Food Packaging,  Flexible Packaging,  Paper Converting  and  Specialty Applications.


Our Heat Seal Adhesives & Coatings can be applied by different methods including –  Knife over roll, reverse roll, nip roller, gravure, brush, spray or roller. 

The Heat Sealing process can be performed Both In-line or after initial application.


Our Heat Seals can also be Custom formulated for specialty applications to meet requirements for –  viscosity, solids %, non-blocking, clarity & heat sealing temperature.


We also have the capability to  Coat our Heat Seals  onto many different substrates including  – felts, films, liners, magnet, papers, plastics, and textiles; for various medical and industrial applications.


We can supply our Heat Seal adhesive products in  – Tape and Roll Stock Form.  Click here for more information.


Below are some of our most common types of Heat Seal Adhesives:


# 7-8258

7-8258 Acrylic Emulsion heat seal adhesive –  58% Solids,  100cps.  A packaging adhesive polymer that is heat reactive, self-curing acrylic latex with carboxyl functionality.  Strong adhesion to polar substances with excellent water resistance; fast drying and high bond strength for wet laminations; high oil and plasticiser resistance after crosslinking; broad FDA approvals.

General Information:  7-8258 is excellent for wet laminating because it dries rapidly and develops high bond strength quickly. It performs well in high speed laminating operations.  # 7-8258 also forms strong bonds at relatively low heat sealing temperatures – critical for many temperature-sensitive substrates.  It has good specific adhesion to most polar substrates, and it forms tough, permanent bonds. It also has good water resistance.


# HS410

HS410 is an EVA type heat seal film adhesive – Self-wound on a 42# silicon liner that is transferable from the silicon liner.  HS410 has a wide range activation temperature with good adhesion to a variety of substrates including metals, coated films, papers and plastics. It was designed for bonding to difficult substrates in the sanding disc and Tin Tie adhesive markets.


HS410 – HEAT SEAL FILM ADHESIVE:

Adhesive Coat Weight lbs.:  14 ± 2.
Adhesive Softening Point °F:  175 ± 5.
Activation Temperature °F:  250 – 265.
Application Temperature °F:  300 – 350.
Dwell Time Sec:  0.2 plus (Depending on temperature and pressure).

General Information:  HS410 Adhesive is specifically formulated for bonding to metal, non-woven, paper and film substrates. All ingredients used in the makeup of this adhesive meet the requirements for FDA Regulation 175.105 “Adhesives”.


# 7-26387

7-26387 Acrylic Emulsion heat seal adhesive – 61% Solids,  300cps.  Flexible with adhesion to glass, metal and wood; high filler loading; thickens with pH; recommended for caulk and sealant applications.


# 7-3005

7- 3005 Acrylic Emulsion heat seal adhesive – 47% Solids,  500cps.  Low temperature heat seal; fast seal time; suitable for flexible packaging; high gloss; FDA 175.105; 175.300; 175.320; 176.170; 176.180; 177.1210.


# 7-3028

7-3028 Acrylic Emulsion heat seal adhesive – 50% Solids,  1000cps.  Suitable for paper-to-film, film-to-film heat seal applications.


# 7-26084

7-26084 Acrylic Emulsion heat seal adhesive – 48% Solids,  100cps.  Suitable for paper coating; excellent solvent and plasticiser resistance; self-crosslinking; blendable with natural rubber; broad FDA approvals.


# 7-26288

7-26288 Acrylic Emulsion heat seal adhesive – 49% Solids,  100cps.  Recommended for nylon, mylar and paper substrates; excellent scrub resistance; can be used for heat seal and cold seal formulations; broad FDA approvals.


# 7-26315

7-26315 Acrylic Emulsion heat seal adhesive – 49% Solids,  50cps.  Tack-free hard polymer; recommended for paper substrates; excellent water resistance and heat stability; excellent scrub resistance; broad FDA approvals.


For Help Choosing the best heat seal adhesive for Your Application

Please Call us at  800-249-0337  – To Request a Product SDS, TDS, Pricing, Lead times, and to explore the many adhesive options we have to offer. We look forward to providing you with the  adhesive that will maximize efficiency and profitability for your company.


Solvent-based – Heat Seal Adhesives

We offer a full line of heat seals, glossy & matte overprints and primers for most requirements.

Some examples of our solvent based Overprints, Primers and Heat Seal products include:


# 8605 –  High heat resistant, very flexible mar & scuff resistant matte overprint having excellent hot release properties. Suitable for most films, aluminum foils, coated & non-coated papers.

# 8610 –  Super high heat resistant, glossy 2-part overprint for high demand applications. Used with most coated and non-coated papers and aluminum foils.

# 8611 – Primer used for a wide range of release applications, slip and primer coating for untreated film, paper & primed aluminum foil.

# 8485 – Heatseal coating used for a variety of films, foils & papers substrates. Can be custom formulated for various degrees of tear/bond strength and activation temperature depending on the substrate and final use requirements.


Some examples of our Heat Seal Adhesive applications are:


    • Credit card lamination.
    • Decorative laminates.
    • Film to fiberglass.
    • Film to foams.
    • Film to Foil /metalized film.
    • Heat seal lacquered aluminum foil.
    • Food grade heat seal lacquer foil.
    • Pharmaceutical blister pack foil.
    • Lacquered Aluminum Foil roll for processed cheese wrap.
    • Fire retardant heat seals.
    • Food packaging.
    • PVC to film.
    • Specialty heat seal applications.
    • Textiles for heat sealing.
    • Transfer decal film lamination.

Our Heat Seal Coatings are widely used for these applications:


    • Food Packaging
    • Paper Converting
    • Pharmaceutical Packaging
    • Flexible Packaging
    • Laminating
    • Yogurt Lidding
    • Blister Packaging
    • Credit Card Lamination

Water-based Heat Seal Adhesives


Some examples of our Water-based Heat Seal products include:

Product #DescriptionMSDS/TDS
8215Heat Seal Coating, Designed for Low Heat Resealing applications, Good Oil Resistance, PET/Foils, Strong Final Bonds to Papers, films, foils.Request >>
8240Heat Seal Coating, Designed for food packaging applications, Good Oil Resistance, Strong Final Bonds to Papers, films, foils, Non-Blocking.Request >>
8300Heat Seal Coating, Designed for Yogurt Lidding applications, Good Oil Resistance, Easy Clean up, Strong Final Bonds to Papers, films, foils, Non-Blocking.Request >>
8347Heat Seal Coating, Easy Clean up, Strong Final Bonds to Papers, films, foils, Non-Blocking, Flexible, 1,500 CPS.Request >>
8362Heat Seal Coating, Strongest Final Bonds to Polyester Films, Non-Blocking, Flexible, Designed for Extrusion Laminating applications. 80,000 CPS, Can be made at any Viscosity.Request >>

Read More