Flooring Adhesives
With over 40 years of experience in the adhesives business – Cattie Adhesives is a trusted leader in the manufacturing and distribution of Industrial Grade Flooring Adhesives.
Cattie Adhesives has met the ever-changing demands of the Industrial Flooring Installation industry.
1-Part, Acrylic Flooring Adhesives are Water based and Ready to use.
Our Solvent free, Acrylic adhesives are designed for use with any rubber and vinyl floor covering. Acrylic adhesives creates a permanent bond between rubber or vinyl flooring and the subfloor.
Great for use with roll goods or in areas where a strong bond is required. Acrylic Adhesive can be used on all grades of concrete on, above or below grade in the absence of moisture as well as suspended approved wood floors (APA.)
Product Features:
-
- No VOC’s & NO Odor.
- For porous and non-porous surfaces
- Provides LEED points
- No mixing required
- Easy cleanup
- Exceptional Sheer, side-to-side stability
- Permanent bond
- Ideal for rugged applications
- Partially used containers can be resealed
- Meets ANSI/ESD S 20.20
- VOC content of <0.1 lbs / gallon.
- Complies with the South Coast Air Quality Management District (SCAQMD) Rule 1168 Standard for Rubber Floor Adhesives, which has VOC limit of 60.
- Contributes toward satisfying LEED Credit 4.1: Low Emitting Materials, Adhesives & Sealants.
- Indoor Air Quality Certified to SCS-EC10.3-2014 v3.0.
- Conforms to the CDPH/EHLB Standard Method v1.1-2010 (effective January 1, 2012) for the school classroom, private office, and single-family residence parameters when modeled as Flooring. Also, conforms to the SCAQMD Rule 1168 – Adhesive and Sealants (January 2005); Hong Kong Air Pollution Control (VOC) Regulation.
Flooring Adhesive – Acrylics
# 7-6503
7-6503 is a solvent-free, acrylic adhesive that is designed to permanently install dimensionally stable vinyl skin backed resilient sheet goods, homogenous commercial grade PVC sheet flooring, PVC sheet vinyl (vinyl backed), vinyl tile and vinyl plank. It is also formulated to provide an exceptional bond when installing rubber or vinyl stair treads, over porous and non-porous surfaces free of moisture. It can be used on all grades of concrete on above or below grade in the absence of moisture, as well as suspended approved wood floors (APA). This adhesive has excellent resistance to plasticizer migration and sets to a tough permanent bond.
# 7-6506
7-6506 is a high-quality acrylic pressure sensitive. It provides a strong, long-lasting bond. It is designed for the installation of dimensional stable vinyl-backed tile and solid vinyl tile (12” x 12” maximum) in a “tile over tile” installation. Due to its pressure sensitive characteristics, it eliminates concern about installing a non-porous backed floor covering a non-porous substrate.
#7-6520
7-6520 is a high-quality acrylic pressure sensitive. It provides a strong, long-lasting bond. It is designed for the installation of dimensional stable vinyl-backed tile and solid vinyl tile (12” x 12” maximum) in a “tile over tile” installation. Due to its pressure sensitive characteristics, it eliminates concern about installing a non-porous backed floor covering over a non-porous substrate.
#7-6703
7-6703 is a premium (non-staining) acrylic adhesive, especially designed to permanently install resilient non-PVC Tile, non-PVC Plank, and non-PVC sheet flooring. While designed specifically for non-PVC resilient materials, it also has excellent performance when used with rubber sheet, tile, and stairtreads as well as with resilient PVC Tile, Plank and Sheet Flooring. It may be used on all grade levels of concrete on, above or below grade in the absence of moisture, as well as suspended approved wood floors (APA). This adhesive is non-flammable, water and alkali resistant and freeze-thaw stable. 7-6703 has excellent resistance to plasticizer migration and sets to a tough permanent bond.
#7-6720
7-6720 is a high-quality acrylic pressure sensitive. It provides a strong, long-lasting bond. It is designed for the installation of dimensional stable Non-PVC tile (12” x 12” maximum) in a “tile over tile” installation and for non-PVC backed sheet flooring. Due to its pressure sensitive characteristics, it eliminates concern about installing a non-porous backed floor covering a non-porous substrate.
# 7-867
7-867 is a solvent free, wet set, acrylic flooring adhesive designed for the installation of vinyl backed and homogeneous sheet vinyl, tile floor coverings, and vinyl wall coverings overall industry-approved substrates. 7-867 can be applied on clean, dry, sound subfloors, below, on, or above grade where excessive surface moisture is not a factor (i.e. no drains). Not recommended for non-porous applications.
# 7-870
7-870 is a premium latex adhesive, designed to permanently install dimensionally stable ESD commercial grade PVC sheet flooring or ESD Vinyl Tile. 7-870 may be used on all grades of concrete on above or below grade in the absence of moisture, as well as suspended approved wood floors (APA). This adhesive is non-flammable, water and alkali resistant and freeze-thaw stable. It has excellent resistance to plasticizer migration and sets to a tough permanent bond.
# 7-875
7-875 is a solvent free, water based, acrylic adhesive designed for use with vinyl backed and homogeneous sheet vinyl floor coverings. 7-875 can be applied over clean, dry, sound subfloors, below, on, or above grade where excessive surface moisture is not a factor (i.e. no drains).
# 7-876
7-876 is a water-based adhesive designed for the installation of wall panels over clean, dry, and sound wall surfaces. Do not use adhesives, paints, or primers near exposed foodstuffs. Not for installing wall panels in areas that may be subjected to temperature fluctuations, wet areas, and other severe environmental applications.
Flooring Adhesive – Polyurethanes
# 7-3029
7-3029 is a two-component polyurethane adhesive designed for use with various floor covering materials on most smooth, solid surfaces. When parts A and B are thoroughly mixed, they form a reactive adhesive that cures to a tough, flexible film with good adhesion to a wide range of materials.
# 7-3040
7-3040 adhesive is a two-part, solvent-free, polyurethane adhesive developed and recommended for the installation of wall panels over all permanently clean, dry, and sound wall surfaces. For use on all non-absorbent surfaces, and on absorbent surfaces in severe use environment areas. For installing wall panels in areas that may be subjected to temperature fluctuations, wet areas, and other severe environment application.
Flooring Adhesive – Epoxies
# 7-3031
7-3031 is a two-component Epoxy Stair Nose Filler designed for use with rubber stair treads. It is a solvent-free, non-flammable, high-performance epoxy adhesive, recommended for indoor stair installations over porous and non-porous substrates. It is recommended for round nosing, providing support to the nose or rubber stair treads. Stairs (substrate) must be structurally sound, dry, clean and free of dirt, dust, grease, paint, curing compounds, sealers, or any other extraneous material which may interfere or compromise adhesion. Application over concrete stairs requires the concrete to be fully cured and dry. Adequate adhesive must be applied to the corner of the stair tread nose so that when placed into position all voids are filled.
# 7-3032
7-3032 is a two-component, solvent-free epoxy adhesive designed for use with rubber and vinyl floor covering materials. 7-3032 cures to a tough, flexible film with adhesion to a wide range of substrates. For the istallation of luxury vinyl (vinyl) tile and plank over porous and nonporous subfloors where greater adhesion strength is required. This includes some health care facilities or commercial installations where heavy fixtures or rolling stock will be used.
# 7-3443
7-3443 is a two-component, solvent- free epoxy adhesive designed for use with rubber and vinyl floor-covering materials. 7-3443 cures to a hard, chemically resistant film with adhesion to a wide range of substrates. 7-3443 was designed for use in high alkaline environments.
Flooring Adhesives: High-Performance Solutions for the Flooring Industry
Cattie Adhesives is a leading supplier of high-quality flooring adhesives for a variety of applications in the flooring industry. Our flooring adhesives are designed to provide strong, reliable bonds that can withstand the demands of heavy foot traffic, moisture, and other environmental factors.
Our product range includes a wide variety of flooring adhesives, including pressure-sensitive adhesives, hot melt adhesives, and two-part reactive adhesives. Each of these adhesives has its own unique properties and advantages, making them suitable for several types of flooring installations.
Our pressure-sensitive adhesives are ideal for use with luxury vinyl tiles (LVT), carpet tiles, and other types of flooring that require a strong, yet flexible bond. These adhesives are easy to apply and provide excellent tack and peel strength, ensuring that the flooring stays in place even in high-traffic areas.
Our hot melt adhesives are ideal for use with engineered hardwood, solid hardwood, and bamboo flooring. These adhesives provide a strong, durable bond that can withstand the expansion and contraction that occurs with changes in temperature and humidity.
Our two-part reactive adhesives are ideal for use with rubber flooring and other specialty flooring products. These adhesives provide a strong, chemical bond that can withstand the stresses of heavy foot traffic and other environmental factors.
In addition to our standard product range, we also offer customized formulations to meet the specific needs of our customers. Our team of experienced adhesive engineers will work with you to develop a solution that meets your exact specifications and requirements.
At Cattie Adhesives, we are committed to providing our customers with high-quality flooring adhesives and exceptional customer service.
Contact us today to learn more about our product range and how we can help you find the perfect adhesive solution for your flooring application.