— Quakertown, Pennsylvania
Cattie Adhesives published a one-page heat seal lidding troubleshooting chart for coating-line and packaging engineers. It covers 11 common lidding faults, from lids that will not seal to coated rolls that block, with the likely cause and the first fixes to try for each.
The chart starts from a point that is easy to miss on the line: seal quality depends on three settings at the seal, temperature, pressure and dwell time, and the platen temperature is not the temperature at the seal interface. Map the seal window on your own lid and cup before you change grades, and change one setting at a time.
Faults are grouped by where to look first. On the coating line: blocking, coating that will not anchor to film or foil, streaks and pinholes, and uneven coat weight. At the sealer and filler: no seal, torn lids, leaks after hot fill, lids sticking to the seal head, weak seals after cold storage, and reseal lids that will not reseal. Where a stock grade is listed for a fault, the chart names it, such as 8240 (non-blocking), #8605 (hot-release overprint), #8611 (primer for release, slip and untreated films) and 8215 (low-heat reseal).
Read the heat seal lidding troubleshooting chart · Full troubleshooting guide · Heat seal adhesives
Before you call, have the lid stock, the cup or tray material, the product, the fill temperature and the sealer settings ready. Call 800-249-0337 or request a quote.