Home / Products / Fugitive hot melt

Fugitive and removable hot melt

Fugitive and Removable Hot Melt Adhesives

Low-tack removable hot melt, often called credit card glue, holds a card or insert to a mailer or page, then peels away with little or no residue.

Call 800-249-0337 Request a quote

Send us the grade you run now and we'll match it.

What fugitive hot melt does

Fugitive hot melt is a removable, non-permanent hot melt. It holds a card or insert in place through printing, binding and mailing, then lets the reader peel it off cleanly. Grades run from low tack for lightweight uncoated paper up to high tack for coated stocks. Low-stain grades help keep printed surfaces clean.

Fugitive grades are not made to re-stick. If the piece needs to come off and go back on, use a repositionable grade instead (see below).

Where it's used

  • Direct mail: tipping cards, gift cards and reply pieces to letters and carriers
  • Magazine and catalog inserts and outserts
  • Credit card and membership card carriers
  • Trading card inserts, redemption cards and promotional pieces
  • Temporary holds on paper, paperboard and film

Stock grades

Fugitive and removable hot melt

Product numberTack and typeTypical use
8254Low tack, low viscosity, removableUncoated paper and lightweight substrates
9604Light tack, low viscosityLight-duty temporary holds
8334Fugitive, low viscosityInserts and temporary holds
9907Medium tack, removable, low stainPaper and paperboard; direct mail and card tipping
9629Medium to high tack, fugitive, low stainCoated stocks
9175High tack, fugitive, low stain, clearCoated stocks
8914Removable hot melt, higher viscosityRemovable bonds that need more body (typical 15,000 cps at 350°F)

Repositionable hot melt

Product numberTypeTypical use
9120Repositionable hot melt; high tack, high viscosityCoated stocks; peels clean and re-sticks to metal, film and coated paperboard

Typical values, not specifications. Test for your application. Call 800-249-0337 for the TDS and SDS.

Product numbers are starting points. The right grade depends on your stock, coating, ink and line. Test on your own printed pieces before a run.

Picking a grade

  • Uncoated or lightweight paper: start low tack, so the peel doesn't tear fibers.
  • Coated or UV-coated stock: coated surfaces usually need more tack.
  • Staining: on light or premium print, pick a low-stain grade and test after aging.
  • Peel and re-stick: use repositionable 9120, not a fugitive grade.

Tipping cards or inserts now? Tell us the stock and line, and we'll quote a grade.

Call 800-249-0337 Request a quote

Send us the grade you run now and we'll match it.

FAQ

What is fugitive glue?

Fugitive glue is a low-tack, removable hot melt, often called credit card glue. It holds a card or insert to a mailer or page and peels off with little or no residue.

What is the difference between fugitive and repositionable hot melt?

Fugitive hot melt is made to peel off once. Repositionable hot melt, such as Cattie 9120, peels clean and can be stuck back on.

Which grade should I use on coated stock?

Coated stocks usually need more tack. Start with 9629 or 9175 and test on your own printed pieces. Call 800-249-0337 for a grade match.

Will fugitive hot melt stain my printed pieces?

Grades such as 9907, 9629 and 9175 are low-stain. Test on your own stock and ink, including after aging, before a production run.

Can you match the fugitive glue I run now?

Yes. Send us the grade you run now, your stock and your equipment, and we'll match it and quote it.

Need a price on fugitive hot melt?

Call 800-249-0337 or email sales@cattieadhesives.com. Send us the grade you run now and we'll match it. Cattie Adhesives, Quakertown, PA.