Home / Products / APAO hot melt

APAO / polyolefin hot melt

APAO (Amorphous Polyolefin) Hot Melt Adhesives

APAO hot melts stay soft and tacky, give long open time, and bond foams, olefins, textiles, wood and metal. Pick a grade by job: foam, general assembly, or long open time.

Call 800-249-0337 Request a quote

Send us the grade you run now and we'll match it.

Why use APAO hot melt

APAO, short for amorphous poly-alpha-olefin and also called polyolefin hot melt, is a non-crystalline hot melt. It stays soft, tacky and flexible and has a long open time, so it suits large parts and slow assembly. It bonds open- and closed-cell foam to foam, metal, paper, plastic and wood, and it bonds well to olefins and textiles.

  • Good adhesion to polyolefins, textiles and foam
  • Good creep resistance; high heat resistance grades available
  • Applied by slot, roll transfer or spray, depending on grade
  • Low odor
  • Some grades are used in place of polyamide hot melt

Stock grades by job

Foam and mattress bonding

Product numberTypeTypical use
9223APAOFoam-to-foam product assembly
9159APAO, medium viscosityFoam-to-foam and mixed substrates
9624APAOFoam product assembly
9332HVAPAO, low viscosity, sprayableLaminating foams; difficult substrates; high heat resistance

General product assembly and high heat

Product numberTypeTypical use
9931APAO, high heat resistanceProduct assembly where parts see heat
9628APAOGeneral product assembly
8960APAOCabinet assembly; used in place of polyamide
8428Tackified APAOProduct assembly
8429Tackified APAOProduct assembly; pipe wrap

Long open time and artificial turf

Product numberTypeTypical use
9977APAO, long open timeLarge parts and slow assembly
9935LAPAO, long open time (2 minutes or more), medium viscosityFoam and product assembly
9840MAPAO, low viscosityArtificial turf

Typical values, not specifications. Test for your application. Call 800-249-0337 for the TDS and SDS.

Product numbers are starting points. Grade choice depends on your substrates, applicator and service temperature. For viscosity and softening point, call for the TDS.

Where APAO runs

Foam fabricating and mattresses, cabinets and furniture, appliances, automotive foams and plastics, filters, artificial turf, and general assembly. See product assembly, foam fabricating, mattress and woodworking.

Bonding foam or assembling parts now? Tell us the substrates and applicator, and we'll quote a grade.

Call 800-249-0337 Request a quote

Send us the grade you run now and we'll match it.

FAQ

What is APAO hot melt?

APAO stands for amorphous poly-alpha-olefin, also called polyolefin hot melt. It is a non-crystalline hot melt that stays soft, tacky and flexible, with a long open time.

What does APAO hot melt bond?

APAO bonds open- and closed-cell foam to foam, metal, paper, plastic and wood, and it bonds well to olefins and textiles. Test on your own parts before a run.

Which APAO grade has the longest open time?

9935L has a long open time of 2 minutes or more, and 9977 is also a long open time grade. Call 800-249-0337 for the TDS.

Can APAO replace polyamide hot melt?

In some uses, yes. 8960 is an APAO grade used for cabinet assembly in place of polyamide. Tell us the part and the heat it sees, and we'll check the fit.

Can you match the APAO grade I run now?

Yes. Send us the grade you run now, your substrates and your applicator, and we'll match it and quote it.

Need a price on APAO hot melt?

Call 800-249-0337 or email sales@cattieadhesives.com. Send us the grade you run now and we'll match it. Cattie Adhesives, Quakertown, PA.