Home / Applications / Door laminating
Door Laminating Adhesives
Commercial and residential door laminating — PVA, PU dispersions, PUR hot melt, or moisture-cure polyurethane. Match the press and the skin.
Door-manufacturing adhesives from polyvinyl acetate (PVA) to hot-melt polyurethane (HMPUR) and 100% solids liquid moisture-cure polyurethane. Interior and exterior door laminating. PU dispersions for automated laminating, spraying, and drying. High initial strength for faster production. Fire-resistant PVA grades are listed on this page.
Also from this line
- 1- and 2-part water-based polyurethane dispersions (PUD)
- PVA water-based and solvent-based; fire-resistant grades
- PUR moisture-curing hot melt for door lamination
Stock grades
- 7-859 — two-part water-borne PUD for membrane press / vacuum-form vinyl and PVC to particleboard; use with hardener 7-560
- 7-866 — two-part water-borne PU for high-gloss vinyl and PVC foils; hardener 7-560
- 7-883WH — one-part water-borne PU for the same 3D / door work
- 7-560 — isocyanate crosslinker
- 7-1001 — aliphatic polyurethane crosslinker at about 5% mix; PS foam, cedar, plastics; pot life > 8 hours, non-yellowing
Related: 3D lamination, woodworking.
Send the skin, the core, and the press.
